Planetary Gearbox

Ultra Precision Planetary Gearbox Platform 06 — Engineering Configuration V046

Exact SKU: ES-PG-C36-S006-V046

Confirm ratio, torque, speed, backlash, motor interface, mounting and duty-cycle requirements before final selection.

Frame Size
110 mm
Backlash
5 arcmin
Efficiency
≥94%
Mass
5.6 kg
Motor Power
1,500 W
Motor Adapter Interface
T1
Number of Stages
1
Moment of Inertia
2.57 kg·cm²
Request a Quote

Product Media

Interactive 3D preview

Review the component envelope and interface references before requesting controlled engineering files.

3D Design File Viewer

Interactive 3D preview

Reviewed GLB preview for preliminary fit review.

More

Preparing 3D preview

The browser-safe model is being prepared for interactive review.

Reviewed browser preview for preliminary fit review.

Full Specifications

Grouped engineering parameters

All 48 reviewed public parameters for this exact SKU are shown below. Unreviewed source fields remain excluded.

Dimensions & Integration

Dimension D1
40 mm
Dimension D2
63 mm
Dimension D3
80 mm
Dimension D4
110 mm
Dimension D5
135 mm
Dimension D6
11×M6×1P mm
Dimension D7
145 mm
Dimension D8
6 mm
Dimension D9
90 mm
Dimension D10
8×5.5 mm
Dimension D11
120 mm
Dimension D12
109.2 mm
Dimension L1
12 mm
Dimension L2
13.5 mm
Dimension L3
6 mm
Dimension L4
29 mm
Dimension L5
10 mm
Dimension L6
8 mm
Dimension L7
10 mm
Dimension L8
37 mm
Dimension L9
7 mm
Dimension L10
1 mm
Dimension C14
130 mm
Dimension C24
M8×1.25P mm
Dimension C34
32 mm
Dimension C44
50 mm
Dimension C5
110 mm
Dimension C64
5 mm
Dimension C74
115 mm
Dimension C84
19.5 mm
Dimension C94
121.5 mm
Dimension C104
13 mm
Dimension OD
110×3 mm

Performance Parameters

Rated Output Torque
230 N·m
Backlash
5 arcmin
Emergency Stop Torque
3 times rated output torque
Efficiency
≥94%

Mechanical Parameters

Frame Size
110 mm
Motor Power
1,500 W
Motor Adapter Interface
T1
Number of Stages
1
Moment of Inertia
2.57 kg·cm²
Mass
5.6 kg

Environmental & Insulation

Service Life
20000* h
Operating temperature
-10°C~+90°C
Lubrication Method
Synthetic lubricating grease (NYOGEL 792D)
Protection Rating
IP65 °C
Mounting Orientation
Any

RFQ Workflow

Request pricing and engineering review

The request carries this exact public SKU and page context. Controlled 2D and native CAD files remain subject to engineering review.

Request a Quote

Engineering Files

Controlled documentation access

2D drawing

Controlled Review

A reviewed attachment is handled through the controlled documentation workflow.

Request 2D drawing

STEP / STP CAD

Controlled Review

A validated browser preview may be available; native CAD remains controlled.

Request controlled CAD

Compliance

Product Integration & Compliance

OEM INTEGRATION RESPONSIBILITY

This product is a component or configurable module intended for integration into an OEM, commercial, industrial or research system.

The customer is responsible for final product selection, system-level risk assessment, safety functions, mechanical and electrical integration, validation, certification and regulatory compliance.

Published ratings apply only under the stated conditions. Confirm the operating point, interfaces, control compatibility, thermal conditions, duty cycle and required documentation before final selection.

This product is not approved for a safety-critical or restricted application unless expressly authorized in writing.

TRANSMISSION INTEGRATION

Confirm rated and peak torque, backlash, stiffness, radial and axial loads, mounting accuracy, lubrication, temperature, duty cycle, shock loading and expected service life.

Published service-life information depends on the stated load and operating assumptions and does not constitute a complete system-life guarantee.

Read Product & Service Compliance Notice