Planetary Gearbox

Ultra Precision Planetary Gearbox Platform 06 — Engineering Configuration V048

Exact SKU: ES-PG-C36-S006-V048

Confirm ratio, torque, speed, backlash, motor interface, mounting and duty-cycle requirements before final selection.

Frame Size: 110 mm
Backlash: 7 arcmin
Torsional Rigidity: 82 N·m/arcmin
Efficiency: ≥94%
Mass: 7.3 kg
Motor Power: 750 W
Motor Adapter Interface: T2
Number of Stages: 2

Request a Quote

Product Media

Interactive 3D preview

Review the component envelope and interface references before requesting controlled engineering files.

3D Design File Viewer

Interactive 3D preview

Reviewed GLB preview for preliminary fit review.

Preparing 3D preview

The browser-safe model is being prepared for interactive review.

Reviewed browser preview for preliminary fit review.

Full Specifications

Grouped engineering parameters

All 54 reviewed public parameters for this exact SKU are shown below. Unreviewed source fields remain excluded.

Dimensions & Integration

Dimension D1: 40 mm
Dimension D2: 63 mm
Dimension D3: 80 mm
Dimension D4: 110 mm
Dimension D5: 135 mm
Dimension D6: 11×M6×1P mm
Dimension D7: 145 mm
Dimension D8: 6 mm
Dimension D9: 77 mm
Dimension D10: 8×5.5 mm
Dimension D11: 120 mm
Dimension D12: 109.2 mm
Dimension L1: 12 mm
Dimension L2: 13.5 mm
Dimension L3: 6 mm
Dimension L4: 29 mm
Dimension L5: 10 mm
Dimension L6: 8 mm
Dimension L7: 10 mm
Dimension L8: 87.5 mm
Dimension L9: 7 mm
Dimension L10: 1 mm
Dimension C15: 100 mm
Dimension C25: M6×1P mm
Dimension C35: ≤19/≤24 mm
Dimension C45: 40 mm
Dimension C5: 80 mm
Dimension C65: 4 mm
Dimension C75: 90 mm
Dimension C85: 17 mm
Dimension C95: 160 mm
Dimension C105: 10.75 mm
Dimension OD: 110×3 mm

Performance Parameters

Rated Output Torque: 230 N·m
Rated Input Speed: 3,000 rpm
Maximum Input Speed: 6,000 rpm
Backlash: 7 arcmin
Torsional Rigidity: 82 N·m/arcmin
Maximum Bending Moment: 430 N·m
Permissible Axial Load: 2,990 N
Emergency Stop Torque: 3 times rated output torque
Efficiency: ≥94%

Mechanical Parameters

Frame Size: 110 mm
Motor Power: 750 W
Motor Adapter Interface: T2
Number of Stages: 2
Moment of Inertia: 0.44 kg·cm²
Mass: 7.3 kg

Environmental & Insulation

Noise Level: 63 dB(A)
Service Life: 20000* h
Operating temperature: -10°C~+90°C
Lubrication Method: Synthetic lubricating grease (NYOGEL 792D)
Protection Rating: IP65 °C
Mounting Orientation: Any

RFQ Workflow

Request pricing and engineering review

The request carries this exact public SKU and page context. Controlled 2D and native CAD files remain subject to engineering review.

Request a Quote

Engineering Files

Controlled documentation access

2D drawing

Controlled Review

A reviewed attachment is handled through the controlled documentation workflow.

Request 2D drawing

STEP / STP CAD

Controlled Review

A validated browser preview may be available; native CAD remains controlled.

Request controlled CAD

Compliance

Product Integration & Compliance

OEM INTEGRATION RESPONSIBILITY

This product is a component or configurable module intended for integration into an OEM, commercial, industrial or research system.

The customer is responsible for final product selection, system-level risk assessment, safety functions, mechanical and electrical integration, validation, certification and regulatory compliance.

Published ratings apply only under the stated conditions. Confirm the operating point, interfaces, control compatibility, thermal conditions, duty cycle and required documentation before final selection.

This product is not approved for a safety-critical or restricted application unless expressly authorized in writing.

TRANSMISSION INTEGRATION

Confirm rated and peak torque, backlash, stiffness, radial and axial loads, mounting accuracy, lubrication, temperature, duty cycle, shock loading and expected service life.

Published service-life information depends on the stated load and operating assumptions and does not constitute a complete system-life guarantee.

Read Product & Service Compliance Notice