3D Design File Viewer
Interactive 3D preview
Reviewed GLB preview for preliminary fit review.
More
Preparing 3D preview
The browser-safe model is being prepared for interactive review.
Reviewed browser preview for preliminary fit review.
Planetary Gearbox
Ultra Precision Planetary Gearbox Platform 08 — Engineering Configuration V007
Exact SKU: ES-PG-C36-S008-V007
Confirm ratio, torque, speed, backlash, motor interface, mounting and duty-cycle requirements before final selection.
- Frame Size
- 90 mm
- Backlash
- 6 arcmin
- Efficiency
- ≥94%
- Mass
- 6.4 kg
- Motor Power
- 1,000 W
- Motor Adapter Interface
- T5
- Number of Stages
- 1
- Moment of Inertia
- 1.87 kg·cm²
Product Media
Interactive 3D preview
Review the component envelope and interface references before requesting controlled engineering files.
Full Specifications
Grouped engineering parameters
All 43 reviewed public parameters for this exact SKU are shown below. Unreviewed source fields remain excluded.
Dimensions & Integration
- Dimension D1
- 100 mm
- Dimension D2
- 6.6 mm
- Dimension D3
- 22 mm
- Dimension D4
- 80 mm
- Dimension D5
- 65 mm
- Dimension D6
- M8×1.25P mm
- Dimension D7
- 116 mm
- Dimension L1
- 90 mm
- Dimension L2
- 48 mm
- Dimension L3
- 10 mm
- Dimension L4
- 1.5 mm
- Dimension L5
- 32 mm
- Dimension L6
- 3 mm
- Dimension L7
- 8 mm
- Dimension L8
- 203 mm
- Dimension L9
- 19 mm
- Dimension C14
- 100 mm
- Dimension C24
- M6×1P mm
- Dimension C3
- ≤19/≤24 mm
- Dimension C44
- 40 mm
- Dimension C5
- 80 mm
- Dimension C64
- 4 mm
- Dimension C74
- 90 mm
- Dimension C84
- 17 mm
- Dimension C94
- 152.5 mm
- Dimension C104
- 10.75 mm
- Dimension B1
- 6 mm
- Dimension H1
- 24.5 mm
Performance Parameters
- Rated Output Torque
- 100 N·m
- Backlash
- 6 arcmin
- Emergency Stop Torque
- 3 times rated output torque
- Efficiency
- ≥94%
Mechanical Parameters
- Frame Size
- 90 mm
- Motor Power
- 1,000 W
- Motor Adapter Interface
- T5
- Number of Stages
- 1
- Moment of Inertia
- 1.87 kg·cm²
- Mass
- 6.4 kg
Environmental & Insulation
- Service Life
- 20000* h
- Operating temperature
- -10°C to +90°C
- Lubrication Method
- Synthetic lubricating grease
- Protection Rating
- IP65 °C
- Mounting Orientation
- Any
RFQ Workflow
Request pricing and engineering review
The request carries this exact public SKU and page context. Controlled 2D and native CAD files remain subject to engineering review.
Engineering Files
Controlled documentation access
2D drawing
Controlled Review
A reviewed attachment is handled through the controlled documentation workflow.
Request 2D drawingSTEP / STP CAD
Controlled Review
A validated browser preview may be available; native CAD remains controlled.
Request controlled CADCompliance
Product Integration & Compliance
OEM INTEGRATION RESPONSIBILITY
This product is a component or configurable module intended for integration into an OEM, commercial, industrial or research system.
The customer is responsible for final product selection, system-level risk assessment, safety functions, mechanical and electrical integration, validation, certification and regulatory compliance.
Published ratings apply only under the stated conditions. Confirm the operating point, interfaces, control compatibility, thermal conditions, duty cycle and required documentation before final selection.
This product is not approved for a safety-critical or restricted application unless expressly authorized in writing.
TRANSMISSION INTEGRATION
Confirm rated and peak torque, backlash, stiffness, radial and axial loads, mounting accuracy, lubrication, temperature, duty cycle, shock loading and expected service life.
Published service-life information depends on the stated load and operating assumptions and does not constitute a complete system-life guarantee.
OEM INTEGRATION RESPONSIBILITY: OEM component integration: final selection, system-level risk assessment, safety functions, validation, certification and regulatory compliance remain the responsibility of the customer and system integrator. Read Product & Service Compliance Notice: /legal/product-service-compliance