3D Design File Viewer
Interactive 3D preview
Reviewed GLB preview for preliminary fit review.
More
Preparing 3D preview
The browser-safe model is being prepared for interactive review.
Reviewed browser preview for preliminary fit review.
Planetary Gearbox
Ultra Precision Planetary Gearbox Platform 09 — Engineering Configuration V113
Exact SKU: ES-PG-C36-S009-V113
Confirm ratio, torque, speed, backlash, motor interface, mounting and duty-cycle requirements before final selection.
- Frame Size
- 180 mm
- Backlash
- 5 arcmin
- Efficiency
- ≥94%
- Mass
- 29 kg
- Motor Power
- 4,000 W
- Motor Adapter Interface
- T6
- Number of Stages
- 1
- Moment of Inertia
- 22.51 kg·cm²
Product Media
Interactive 3D preview
Review the component envelope and interface references before requesting controlled engineering files.
Full Specifications
Grouped engineering parameters
All 41 reviewed public parameters for this exact SKU are shown below. Unreviewed source fields remain excluded.
Dimensions & Integration
- Dimension D1
- 215 mm
- Dimension D2
- 13 mm
- Dimension D3
- 55 mm
- Dimension D4
- 160 mm
- Dimension D5
- M20×2.5P mm
- Dimension D6
- 240 mm
- Dimension L1
- 180 mm
- Dimension L2
- 105 mm
- Dimension L3
- 20 mm
- Dimension L4
- 82 mm
- Dimension L5
- 70 mm
- Dimension L6
- 6 mm
- Dimension L7
- 20 mm
- Dimension L8
- 154 mm
- Dimension L9
- 42 mm
- Dimension C1
- 215 mm
- Dimension C2
- M12×1.75P mm
- Dimension C3
- ≤42/≤48 mm
- Dimension C4
- 85 mm
- Dimension C5
- 180 mm
- Dimension C6
- 6 mm
- Dimension C7
- 190 mm
- Dimension C8
- 29 mm
- Dimension C9
- 288 mm
- Dimension B1
- 16 mm
- Dimension H1
- 59 mm
Performance Parameters
- Rated Output Torque
- 900 N·m
- Backlash
- 5 arcmin
- Emergency Stop Torque
- 3 times rated output torque
- Efficiency
- ≥94%
Mechanical Parameters
- Frame Size
- 180 mm
- Motor Power
- 4,000 W
- Motor Adapter Interface
- T6
- Number of Stages
- 1
- Moment of Inertia
- 22.51 kg·cm²
- Mass
- 29 kg
Environmental & Insulation
- Service Life
- 20,000 h
- Operating temperature
- -10°C to +90°C
- Lubrication Method
- Synthetic lubricating grease
- Protection Rating
- IP65 °C
- Mounting Orientation
- Any
RFQ Workflow
Request pricing and engineering review
The request carries this exact public SKU and page context. Controlled 2D and native CAD files remain subject to engineering review.
Engineering Files
Controlled documentation access
2D drawing
Controlled Review
A reviewed attachment is handled through the controlled documentation workflow.
Request 2D drawingSTEP / STP CAD
Controlled Review
A validated browser preview may be available; native CAD remains controlled.
Request controlled CADCompliance
Product Integration & Compliance
OEM INTEGRATION RESPONSIBILITY
This product is a component or configurable module intended for integration into an OEM, commercial, industrial or research system.
The customer is responsible for final product selection, system-level risk assessment, safety functions, mechanical and electrical integration, validation, certification and regulatory compliance.
Published ratings apply only under the stated conditions. Confirm the operating point, interfaces, control compatibility, thermal conditions, duty cycle and required documentation before final selection.
This product is not approved for a safety-critical or restricted application unless expressly authorized in writing.
TRANSMISSION INTEGRATION
Confirm rated and peak torque, backlash, stiffness, radial and axial loads, mounting accuracy, lubrication, temperature, duty cycle, shock loading and expected service life.
Published service-life information depends on the stated load and operating assumptions and does not constitute a complete system-life guarantee.
OEM INTEGRATION RESPONSIBILITY: OEM component integration: final selection, system-level risk assessment, safety functions, validation, certification and regulatory compliance remain the responsibility of the customer and system integrator. Read Product & Service Compliance Notice: /legal/product-service-compliance