3D Design File Viewer
Interactive 3D preview
Reviewed GLB preview for preliminary fit review.
More
Preparing 3D preview
The browser-safe model is being prepared for interactive review.
Reviewed browser preview for preliminary fit review.
Planetary Gearbox
Ultra Precision Planetary Gearbox Platform 09 — Engineering Configuration V115
Exact SKU: ES-PG-C36-S009-V115
Confirm ratio, torque, speed, backlash, motor interface, mounting and duty-cycle requirements before final selection.
- Frame Size
- 220 mm
- Backlash
- 5 arcmin
- Efficiency
- ≥94%
- Mass
- 48 kg
- Motor power
- 15,000 W
- Motor Adapter Interface
- T1
- Number of Stages
- 1
- Moment of Inertia
- 50.56 kg·cm²
Product Media
Interactive 3D preview
Review the component envelope and interface references before requesting controlled engineering files.
Full Specifications
Grouped engineering parameters
All 41 reviewed public parameters for this exact SKU are shown below. Unreviewed source fields remain excluded.
Dimensions & Integration
- Dimension D1
- 250 mm
- Dimension D2
- 17 mm
- Dimension D3
- 75 mm
- Dimension D4
- 180 mm
- Dimension D5
- M20×2.5P mm
- Dimension D6
- 292 mm
- Dimension L1
- 220 mm
- Dimension L2
- 138 mm
- Dimension L3
- 30 mm
- Dimension L4
- 105 mm
- Dimension L5
- 90 mm
- Dimension L6
- 7 mm
- Dimension L7
- 25 mm
- Dimension L8
- 163.5 mm
- Dimension L9
- 42 mm
- Dimension C1
- 235 mm
- Dimension C2
- M12×1.75P mm
- Dimension C3
- 55 mm
- Dimension C4
- 116 mm
- Dimension C5
- 200 mm
- Dimension C6
- 6 mm
- Dimension C7
- 220 mm
- Dimension C8
- 63 mm
- Dimension C9
- 364.5 mm
- Dimension B1
- 20 mm
- Dimension H1
- 79.5 mm
Performance Parameters
- Rated Output Torque
- 1,500 N·m
- Backlash
- 5 arcmin
- Emergency Stop Torque
- 3 times rated output torque
- Efficiency
- ≥94%
Mechanical Parameters
- Frame Size
- 220 mm
- Motor Adapter Interface
- T1
- Number of Stages
- 1
- Moment of Inertia
- 50.56 kg·cm²
- Mass
- 48 kg
- Motor power
- 15,000 W
Environmental & Insulation
- Service Life
- 20,000 h
- Operating temperature
- -10°C to +90°C
- Lubrication Method
- Synthetic lubricating grease
- Protection Rating
- IP65 °C
- Mounting Orientation
- Any
RFQ Workflow
Request pricing and engineering review
The request carries this exact public SKU and page context. Controlled 2D and native CAD files remain subject to engineering review.
Engineering Files
Controlled documentation access
2D drawing
Controlled Review
A reviewed attachment is handled through the controlled documentation workflow.
Request 2D drawingSTEP / STP CAD
Controlled Review
A validated browser preview may be available; native CAD remains controlled.
Request controlled CADCompliance
Product Integration & Compliance
OEM INTEGRATION RESPONSIBILITY
This product is a component or configurable module intended for integration into an OEM, commercial, industrial or research system.
The customer is responsible for final product selection, system-level risk assessment, safety functions, mechanical and electrical integration, validation, certification and regulatory compliance.
Published ratings apply only under the stated conditions. Confirm the operating point, interfaces, control compatibility, thermal conditions, duty cycle and required documentation before final selection.
This product is not approved for a safety-critical or restricted application unless expressly authorized in writing.
TRANSMISSION INTEGRATION
Confirm rated and peak torque, backlash, stiffness, radial and axial loads, mounting accuracy, lubrication, temperature, duty cycle, shock loading and expected service life.
Published service-life information depends on the stated load and operating assumptions and does not constitute a complete system-life guarantee.
OEM INTEGRATION RESPONSIBILITY: OEM component integration: final selection, system-level risk assessment, safety functions, validation, certification and regulatory compliance remain the responsibility of the customer and system integrator. Read Product & Service Compliance Notice: /legal/product-service-compliance